Renovations · Ringwood VIC 3134
Bathroom Renovation Plumbing in Ringwood
A good bathroom renovation starts behind the walls. We handle the plumbing for bathroom, ensuite and laundry renovations across Ringwood, from strip-out to final fit-off. Ring 03 9088 4157.

What renovation plumbing involves
Planning
Before any tiles come off, we look at where existing pipes and drains run, what can move and what cannot. Moving a toilet a long way from the existing waste, or putting a shower where there is no fall to a drain, can add significant cost. We help you plan a layout that works with the plumbing.
Strip-out and disconnection
We disconnect and cap water and drainage so the old bathroom can be removed safely.
Rough-in
Rough-in is the plumbing that goes inside walls and floors before lining and tiling:
- Water supply pipes to each fixture
- Shower and bath mixers set in the wall
- Drainage for the toilet, basin, shower and bath
- Floor waste positions
- Connections for in-wall cisterns where chosen
Getting the heights and positions right at this stage is essential. Once tiles go on, changes are expensive.
Waterproofing coordination
Waterproofing is usually done by a specialist or the builder. We coordinate so that penetrations, floor wastes and puddle flanges are positioned correctly for the waterproofer.
Fit-off
After tiling, we install toilets, basins, vanities, tapware, shower heads, bath spouts and accessories, connect everything and test for leaks.
Ringwood bathrooms
Post-war houses
Older Ringwood homes often have small bathrooms with separate toilets, earthenware drains under timber floors and copper or galvanised supply pipes. Renovations here are a chance to replace old pipework, upgrade drainage connections and modernise the layout. Timber floors make relocating drains more flexible than a slab.
Units and townhouses
Units built from the seventies onward are often on concrete slabs, which limits where drains can move without cutting the slab. Many owners want to convert a bath to a walk-in shower or add a second vanity.
Apartments
Apartment renovations in Ringwood need owners corporation approval, compliance with building rules, and coordination of water shutdowns with the building manager. Drain positions are fixed by the building structure. We work within those constraints and help you plan around them.
Popular upgrades
- Walk-in showers with linear grates
- In-wall cisterns with wall-hung pans
- Wall-mounted basin mixers
- Freestanding baths
- Heated towel rails
- Floor-level shower entry for accessibility
- Second basins in ensuites
Laundries and kitchens
We also handle plumbing for laundry and kitchen renovations, including relocating sinks, troughs and dishwasher and washing machine connections.
Compliance
Renovation plumbing must meet the plumbing code. We issue a compliance certificate for the regulated work we complete.
Working with your builder
We regularly work with builders, tilers and waterproofers in the area. If you are managing the renovation yourself, we can recommend the right order of trades and help keep the project on schedule.
Budget tips
The biggest cost driver in renovation plumbing is moving things. Keeping the toilet, shower and basin roughly where they are now saves money that can go into tiles, tapware or storage. If you do want a new layout, talk to us early so the cost is clear before you commit to a design.
Ordering fixtures
Buy fixtures before rough-in, or at least have the models chosen. Mixer bodies, in-wall cisterns and floor wastes all have specific setting-out dimensions, and getting those right at rough-in avoids awkward gaps, crooked tapware and remedial work later.
Accessible bathrooms
For older residents or anyone with limited mobility, we can plumb for step-free showers, raised toilets, grab-rail-friendly layouts and lever tapware.
Laundry upgrades
Many Ringwood homes have laundries in cramped spaces, often next to the bathroom or in an enclosed back porch. Renovations commonly add a wider trough, better storage and dedicated taps for the washing machine. We can relocate drainage and water points to suit a new layout and fit quarter-turn valves that are easier to shut off.
What the plumber needs from you
Before rough-in, confirm your fixture choices, the tiler's floor build-up height and the position of vanities and niches. A short on-site meeting with you, the builder and the plumber at this stage prevents most of the common renovation mistakes.
Hot water during a renovation
If your hot water unit is old, a renovation is a good time to replace it, especially if the work involves upgrading to larger shower heads or adding a bath. Matching the system to your new bathroom avoids a disappointing first shower. We can also add a tempering valve or check the existing one so the new bathroom delivers water at a safe temperature.
Ring us
For bathroom renovation plumbing in Ringwood, ring 03 9088 4157.
The standard
Every bathroom renovation plumbing job includes
| Finding the fault | Camera, locator, thermal imager or gauge as the job needs, with what we find shown to you |
|---|---|
| Agreeing the cost | Discussed on site before work begins, and written down for bigger jobs |
| The plumber | Licensed in Victoria for the class of work involved, and insured |
| Materials | WaterMark certified fittings and fixtures installed to the Australian Standards |
| Paperwork | Compliance certificate for regulated work, plus photos or footage when useful |
| Leaving | Everything tested with you, work area cleaned, old parts taken away |
Asked and answered
Bathroom Renovation Plumbing in Ringwood: your questions
Can I move my toilet during a renovation?
Often yes, depending on the floor type and drain location. Slab floors are more limiting.
Do you do waterproofing?
We coordinate with waterproofers so penetrations and drains are positioned correctly.
Can you renovate a bathroom in an apartment?
Yes, with owners corporation approval and coordination with the building manager.
Will I get a compliance certificate?
Yes, for the regulated plumbing work we complete.
Can you replace old pipes during the renovation?
Yes. A renovation is a good time to replace old copper or galvanised pipework.
When should I choose my tapware?
Before rough-in, so mixer bodies, cisterns and wastes can be set out to the right dimensions.
How long does renovation plumbing take?
Rough-in for a typical bathroom takes a day or two, and fit-off after tiling usually takes about a day, depending on the fixtures and any changes to the layout.
Reading room
Before you call, read this
Quotes and bookings
Tell us about the job
Give us the basics and a licensed Ringwood plumber will phone you back. Water pouring somewhere it should not? Do not wait for a reply, ring 03 9088 4157.
There is no price list here on purpose. Every job is looked at first, and the cost is agreed with you before work starts.
The process
Four steps, no guesswork
- 1You ring or write
Tell us what is happening and what sort of property it is. A phone photo of the problem or the hot water label helps us load the right parts.
- 2We look and explain
On site we find the cause, show you what we see and settle the price with you. Nothing starts until you agree.
- 3The repair, tested
Work is carried out to the plumbing code and the relevant Australian Standards, then run and checked with you watching.
- 4Tidy finish, written up
Old parts leave with us, the area is cleaned and you get a written summary, with a certificate where the law requires one.
Elsewhere on this site
More Ringwood plumbing services
Service area
Ringwood first, then the Maroondah suburbs around it
Most of our days start near Ringwood Lake and Eastland. From there it is a short hop north up Warrandyte Road to Ringwood North, Warranwood and Donvale, east along Maroondah Highway to Ringwood East, Croydon and Croydon Hills, south to Bayswater North, and west across the Whitehorse line into Mitcham. Not on the list? Ring 03 9088 4157 and we will tell you straight whether we can help.