Camera and relining · Ringwood VIC 3134
Drain Camera Inspection and Pipe Relining in Ringwood
A camera inspection shows exactly what is happening inside your pipes. Relining repairs cracked and root-damaged pipes from the inside, often without digging a trench. Ring 03 9088 4157.

Why inspect a drain with a camera
Guesswork is expensive. A drain that keeps blocking could have tree roots, a cracked joint, a sagging section, a collapsed pipe or simply a build-up of fat. Each needs a different solution. A camera inspection shows which one you have, where it is and how serious it is.
We use a waterproof camera on a flexible push rod that travels through the pipe, sending live footage to a screen. You can watch with us. A locator in the camera head lets us find its exact position and depth from above ground.
When a camera inspection makes sense
- A drain that has blocked more than once
- Before buying an older home
- Before building an extension, deck or driveway over a sewer line
- After clearing a blockage, to see what caused it
- When planning repairs, to confirm the scope
- For strata buildings with recurring shared drain problems
What the inspection gives you
- Recorded footage of the inspected line
- A summary of what we found and where
- Marked positions of defects if needed
- Recommendations for repair or maintenance
Pipe relining explained
Pipe relining creates a new pipe inside the old one. The process:
- Clean the pipe by clearing roots and debris with a drain machine and jetter.
- Inspect with the camera to confirm the pipe is suitable for relining.
- Measure the length and diameter of the section to be lined.
- Prepare the liner, a flexible tube saturated with resin.
- Install the liner by inverting or pulling it into the pipe through an existing access point.
- Cure the resin so the liner hardens into a smooth, jointless pipe.
- Reinstate junctions where branch lines connect, using a cutting tool.
- Inspect again with the camera to confirm the result.
Why relining suits Ringwood
Many Ringwood homes have earthenware sewers laid decades ago, with established trees, gardens, paving and extensions on top. Digging up the pipe can mean removing trees, lifting driveways or opening floors. Relining avoids most of that. It also seals the joints that roots enter, which addresses the cause of repeated blockages.
When relining is not suitable
Relining works best on pipes that still hold their basic shape. If a section has fully collapsed, has a severe sag or has major misalignment, excavation and replacement may be required for that section. We confirm suitability on camera before recommending relining.
Patch repairs
If the problem is limited to one or two joints, a patch repair seals just those spots. It is a cost-effective option where the rest of the pipe is in good condition.
Stormwater lines
Cameras and relining also work on stormwater drains, which can suffer from root intrusion and cracking in the same way as sewers.
Strata and commercial
For owners corporations and commercial properties, camera inspections help plan maintenance and allocate repair costs between private and shared sections. Relining shared lines minimises disruption to residents and businesses.
Buying an older home
A pre-purchase camera inspection is one of the cheapest ways to avoid a costly surprise. In Ringwood's older streets, it often reveals root intrusion or offset joints that are not visible from above ground. The footage gives you something concrete to discuss with the vendor or factor into your budget.
How long relining lasts
Liners are designed for a long service life, and once cured they are jointless inside the relined section, so roots have nowhere to enter. Junctions and the transitions at each end are the points to watch, which is why we film the line again after the work is finished.
Mapping your sewer for future work
If you are planning an extension, pool, granny flat or new driveway, knowing exactly where the sewer runs and how deep it is can save redesigning later. Using the camera locator, we trace and mark the line on the ground and can sketch its route with depths and access points, so your builder or designer can plan around it.
Root treatment versus relining
Some products claim to kill roots in sewers. They can slow regrowth for a while, but they do not seal the cracked joints that let roots in, so roots usually return. Relining or patch repairs deal with the cause.
What relining cannot fix
Relining does not correct a pipe that has the wrong fall. If a line was laid too flat, it will still be flat after lining.
Ring us
For drain camera inspections and pipe relining in Ringwood, ring 03 9088 4157.
The standard
Every drain camera and relining job includes
| Finding the fault | Camera, locator, thermal imager or gauge as the job needs, with what we find shown to you |
|---|---|
| Agreeing the cost | Discussed on site before work begins, and written down for bigger jobs |
| The plumber | Licensed in Victoria for the class of work involved, and insured |
| Materials | WaterMark certified fittings and fixtures installed to the Australian Standards |
| Paperwork | Compliance certificate for regulated work, plus photos or footage when useful |
| Leaving | Everything tested with you, work area cleaned, old parts taken away |
Asked and answered
Drain Camera and Relining in Ringwood: your questions
How long does a camera inspection take?
Most residential inspections take an hour or two, depending on access and the length of the line.
Can I watch the camera footage?
Yes. You can watch live, and we provide the recording.
Does relining stop tree roots?
Relining seals the joints roots enter through, so it prevents regrowth in the relined section.
Is relining always possible?
No. Collapsed or severely sagging pipes may need excavation. The camera tells us which.
Do I need to move out while you reline?
No. Drains are out of use for a period during the work, but you can stay at home.
Can you map where my sewer runs?
Yes. The camera locator lets us trace and mark the line, with depths, for builders and designers.
Reading room
Before you call, read this
Quotes and bookings
Tell us about the job
Give us the basics and a licensed Ringwood plumber will phone you back. Water pouring somewhere it should not? Do not wait for a reply, ring 03 9088 4157.
There is no price list here on purpose. Every job is looked at first, and the cost is agreed with you before work starts.
The process
Four steps, no guesswork
- 1You ring or write
Tell us what is happening and what sort of property it is. A phone photo of the problem or the hot water label helps us load the right parts.
- 2We look and explain
On site we find the cause, show you what we see and settle the price with you. Nothing starts until you agree.
- 3The repair, tested
Work is carried out to the plumbing code and the relevant Australian Standards, then run and checked with you watching.
- 4Tidy finish, written up
Old parts leave with us, the area is cleaned and you get a written summary, with a certificate where the law requires one.
Elsewhere on this site
More Ringwood plumbing services
Service area
Ringwood first, then the Maroondah suburbs around it
Most of our days start near Ringwood Lake and Eastland. From there it is a short hop north up Warrandyte Road to Ringwood North, Warranwood and Donvale, east along Maroondah Highway to Ringwood East, Croydon and Croydon Hills, south to Bayswater North, and west across the Whitehorse line into Mitcham. Not on the list? Ring 03 9088 4157 and we will tell you straight whether we can help.