Leak detection · Ringwood VIC 3134
Leak Detection in Ringwood
A water bill that has jumped, a damp wall or a meter that ticks over with every tap off usually means a hidden leak. We find it with proper equipment before opening anything up. Ring 03 9088 4157.

Signs of a hidden leak
- A water bill noticeably higher than usual, without a change in use
- The water meter moving when all taps and appliances are off
- Damp patches, bubbling paint or swollen skirting boards
- Mould or musty smells in one area
- Warm spots on floors (a hot water pipe leak)
- Wet patches in the garden or along the driveway that never dry
- Cracks in paving or tiles
- The sound of running water when nothing is on
- Water dripping through a ceiling in an apartment
The meter test
You can check for a leak yourself. Turn off every tap and water-using appliance. Note the reading on the water meter, or watch the small dial or indicator. Wait an hour without using any water. If the reading has changed, water is going somewhere.
On a unit site with individual meters, make sure you are looking at your own meter. If meters are unlabelled, ring us and we will help identify it.
How we find leaks
Acoustic listening
Water escaping from a pressurised pipe makes a sound. Sensitive acoustic equipment lets us listen through floors, walls and ground to trace the noise to its strongest point.
Thermal imaging
A thermal camera shows temperature differences on surfaces. A leaking hot water pipe shows as a warm streak. Cold water leaks cool the surface as moisture evaporates. Thermal imaging helps us map the leak path without opening walls.
Moisture mapping
Moisture meters read the dampness of plaster, timber and concrete. By taking readings across an area, we find the wettest point and the direction water is spreading.
Pressure testing
We isolate sections of the plumbing and pressurise them to see which section loses pressure. This narrows down a leak to a specific line.
Isolating fixtures one by one
For stubborn leaks, we shut off individual fixtures and appliances in turn while watching the meter, which tells us whether the loss is in a toilet, a tap, the hot water system or the pipework itself.
Common leak spots in Ringwood homes
- Under concrete slabs in newer homes, where a pipe fitting has failed under the floor
- Old copper in walls and under floors in post-war homes, where pinholes form over time
- Shower bases and wall tiles, where failed grout or waterproofing lets water into the wall cavity
- Garden service pipes, especially where roots or soil movement have damaged them
- Meter tails on unit sites, where the pipe from the meter to the dwelling runs under shared driveways
- Apartment wet areas, where a leak may show up in the ceiling of the dwelling below
Leaks between apartments
In apartment buildings around central Ringwood, water appearing in a ceiling often comes from the bathroom, laundry or kitchen above. Finding the exact source can involve access to more than one apartment and careful testing of showers, pipes and drains. We work with building managers to coordinate access and provide reports identifying the source.
Shower leaks
Not all shower leaks come from pipes. Failed grout, sealant or waterproofing allows water from normal showering to get into the walls and floor. We test whether the leak is from the supply pipes, the waste or the shower enclosure, so the right repair is done.
After we find the leak
We explain where it is and what caused it, and recommend the repair. In many cases we can fix it the same visit. Where repair involves tiling, waterproofing or significant building work, we explain the scope and can coordinate with other trades.
Water authority leak allowances
If you have had a significant hidden leak, Yarra Valley Water may offer an allowance on your bill once the leak has been repaired. We provide a written report confirming the leak and repair, which you can use in your application.
Why early detection pays
A slow hidden leak can run for months, soaking into framing, plaster and subfloors and encouraging mould. Finding it early keeps the repair small.
Leaks from heating and appliances
Not every hidden water loss is a pipe. A dishwasher, fridge water line or hot water relief drain can also leak out of sight. We check these too.
Pool and irrigation lines
Garden irrigation and pool top-up lines can leak underground for months. Isolating them during testing quickly shows whether they are the cause.
Ring us
For leak detection in Ringwood, ring 03 9088 4157.
The standard
Every leak detection job includes
| Finding the fault | Camera, locator, thermal imager or gauge as the job needs, with what we find shown to you |
|---|---|
| Agreeing the cost | Discussed on site before work begins, and written down for bigger jobs |
| The plumber | Licensed in Victoria for the class of work involved, and insured |
| Materials | WaterMark certified fittings and fixtures installed to the Australian Standards |
| Paperwork | Compliance certificate for regulated work, plus photos or footage when useful |
| Leaving | Everything tested with you, work area cleaned, old parts taken away |
Asked and answered
Leak Detection in Ringwood: your questions
How do I know if I have a hidden leak?
Turn off all taps and watch the water meter. If it moves, you probably have a leak.
Can you find a leak without digging up my floor?
Usually. We use acoustic, thermal and moisture tools to pinpoint the leak before opening anything.
Can you find a leak under a concrete slab?
Yes. Acoustic and thermal methods work well for slab leaks.
Water is coming through my apartment ceiling. Who is responsible?
It depends on the source. We find it and provide a report for the owners corporation and insurers.
Can I get money back on my water bill?
Yarra Valley Water may offer an allowance after a repaired leak. Our report can support your application.
Reading room
Before you call, read this
Quotes and bookings
Tell us about the job
Give us the basics and a licensed Ringwood plumber will phone you back. Water pouring somewhere it should not? Do not wait for a reply, ring 03 9088 4157.
There is no price list here on purpose. Every job is looked at first, and the cost is agreed with you before work starts.
The process
Four steps, no guesswork
- 1You ring or write
Tell us what is happening and what sort of property it is. A phone photo of the problem or the hot water label helps us load the right parts.
- 2We look and explain
On site we find the cause, show you what we see and settle the price with you. Nothing starts until you agree.
- 3The repair, tested
Work is carried out to the plumbing code and the relevant Australian Standards, then run and checked with you watching.
- 4Tidy finish, written up
Old parts leave with us, the area is cleaned and you get a written summary, with a certificate where the law requires one.
Elsewhere on this site
More Ringwood plumbing services
Service area
Ringwood first, then the Maroondah suburbs around it
Most of our days start near Ringwood Lake and Eastland. From there it is a short hop north up Warrandyte Road to Ringwood North, Warranwood and Donvale, east along Maroondah Highway to Ringwood East, Croydon and Croydon Hills, south to Bayswater North, and west across the Whitehorse line into Mitcham. Not on the list? Ring 03 9088 4157 and we will tell you straight whether we can help.